Main Page
Airfix F-80C
Atomic Tank
BASF
D.510
  F8F Bearcat
Destroyer
P-65 X-Wing
Space Cruiser

My Models

Optimized for a 1024 x 768 screen width.
(You can get away with 800 x 600 but don't even try it at 640 x 480!)

Starting Back Up
On The Bench
The Flightline
IPMS Nats '07
Back to My Models
 

Blue Angels Sea Fury

Blue Angels Sea Fury


History:

The Hawker Sea Fury was about as good as a piston engined fighter plane will ever get.  In particular, as good as a radial piston engined fighter will ever get.  The plane represented the pinnacle of Hawker's fighter plane development efforts in World War Two and it arrived just a hair's breadth too late to see service in the war.  Still though, it is a handsome aircraft and some several are still flying today.  A few of those are in private collector's hands while others are slicing up the pylons in the air racing circuit.  The history of this aircraft has far more detail than just what I've typed out here and once again Greg Goebel's site has an excellent page on the Fury and its progenitors:
The Hawker Typhoon, Tempest, & Se Fury.

What got me going with this kit was this bit of "What If" profile work done by Jennings Heilig:

Blue Angels Sea Fury by Jennings Heilig

There's something about aircraft in sea blue schemes that I really like and this one really spoke to me.  I thought about it a bit and realized it would be a very do-able build since the paint scheme was very simple (one color) and the Pioneer Models Sea Fury kit was one I had in hand already.  All I needed was the appropriate decals for this bird.  Superscale did a set of "Early Blue Angels" from back in the late 40's when the Blues first formed.  Their first mounts were standard F6F Hellcats.  They then went on to F8F Bearcats and did them up special.  The standard sea blue was replaced with a custom mix which is now known as Blue Angel Blue.  They also added a very royal yellow (called, what else? - Blue Angel Yellow) to their livery using that for the aircraft markings and highlights.  The Blue Angels refined and changed their livery over the years and what is viewed as the standard Blue Angles scheme today is not what it was back in the 40's.  Jennings worked up this profile as an exercise in "Whiffery" and not as a historically accurate duplication of the actual schemes.  But it was close and in the spirit of the thing I pressed the Microscale set into service.  Thus, with all the pieces in hand I started the build.  I also felt this one would be simple enough to declare it as another "Model In A Month" entry over on Starship Modeler.

The Kit

The standard start

Here's the bits doing the standard start to my building a kit: soaking in dish soap to remove any mold release oils.


PM Sea Fury Parts

This is a relatively simple kit.  PM produces a number of such kits.  They're cleanly moulded, accurate in size and shape and are also on the inexpensive side.  They lack much in the way of interior detail and are also rather basic on the whole.  However, they are well engineered, come together pretty readily, and are generally easy to build.  Just the thing for a Whiff.  I wasn't concerned with the missing details or the lack of any higher refinements.  I just wanted a simple, inexpensive kit that would be the appropriate canvas for the paint scheme and livery.  That was the thing which was what set this one apart - its paint scheme and markings.  Higher levels of detail would be beside the point.  Thus the PM Sea Fury, in all its basicness, was perfect.

Working from the inside out I started with the aircraft interior.  Here, the PM model more resembles the Airfix kits of the 50's and 60's in its utter lack of interior detailing.  There's but a plank of plastic for the cockpit floor, a piece for the seat, another for the cockpit front/ instrument panel, and a final one for the seat back/ cockpit rear.  That's it.  No joystick, pedals, instrument panel facing, etc.,.  Also lacking was anything to cover the void left behind the seat back and the rear fuselage.  That wasn't acceptable even for this limited objectives build.  Not wanting to get too fancy, I simply cut a piece of thin plastic card and bent it over so it attached to the seat back and cockpit floor.

BASF Cockpit

Yeah, it's fuzzy but it shows what I mean.  This was just enough to hide the void and looked just fine through the back of the cockpit canopy once it all went together.

As the objective of this build was simple, so to was the construction.  This is where the basic quality of the PM kit shines through.  The pieces didn't exactly "fall together" but they did attach pretty well and with but a minimum of fuss.  Soon enough I had the major subassemblies ready to go.

BASF Parts Apart

As you can see, I decided to liven the static display of the kit up a bit by "animating" its control surfaces.  Nothing fancy here either.

In short order I had all this together.

BASF All Together

Here you can see the rather small amount of filler I had to use.  You can also make out that rear decking piece I put in behind the seatback in the cockpit.  I think it tidied up that area well.  With the basics good to go it was on to painting.

It was at this point where I frustrated.  The Aztec airbrush I had been using really started crapping out on me.  As this was a "Model In A Month" entry I didn't have time to muck about with this build.  So, I figured I'd try my hand at brushing the paint on.  Any mess would be simple to sand smooth and repeat.  Good thing I wasn't going for perfection on the first coat!

BASF Hang Painted

I used some very fine sandpaper for smoothing this ugly mess out and applied another coat or two.  Eventually, the qualities of the paint and the overall smoothness of the surface won out over my oh-so-skilled brushing abilities.

Basf All Pretty

Once I got the finish finished, I moved on to the little bits.  The prop was a centerpiece of the plane.  It's a monster of a thing with five blades to it and a very large spinner.  Surprisingly, the PM moulding of the big Rotol propeller seemed a bit better than the Special Hobby rendering of the same (I also had the Special Hobby Sea Fury kit on hand) so I was rather pleased with that.  What wasn't pleasing was the way the prop and spinner worked out.  First off, the fit between the prop and holes in the spinner for the blades was very, very tight.  I was worried that I'd break off the blades getting them in just to test the fit for the first time.  Unfortunately, I had to repeat this process several times as that first test fit revealed a very revealing gap between the depth of the holes in the spinner and the thickness of the prop hub.  Looking at it from the side you could clearly see through both in front of and behind the propeller.  I had to cut come several circular pieces of thick plastic card and glue them on to the propeller hub, front and back, before I achieved enough of a sight line masking so that you could no longer see through it all.

The PM canopy piece was functional but comparing it to the Special Hobby vacuform one it just didn't measure up.  As the SH kit came with two vac canopies I decided to try my hand at using it here.  Surprisingly, for my first vacuform canopy effort, this one worked out perfectly.  A bit of sanding and the thing was spot on.

The PM landing gear doors were drastically over scale so I used thin plastic sheet to replace them.  This gives a much more scale effect and I didn't worry about the relative lack of detailing to them.  I replaced all the gear doors this way - including the tailwheel doors.

Some careful decal work later and I now had myself a Blue Angels Sea Fury!

BASF Beauty

And there she is in all her blue glory!  Everything finally came together on Memorial Day '07.  The sun had finally burned through the marine layer and was giving its expected brilliant hard edge illumination, I'd just finished spray gluing the Verlinden "Airfield Tarmac" sections together onto a piece of foamcore to yield a suitable (and very flat) base, and the batteries for my camera were fully charged.  And away with the beauty shots I went.

BASF Beauty 02

This is a good one.  I think it nicely captures the lines of the Sea Fury as well as nicely showing the Blue Angels livery.

Blue on Blue

For the next several images I moved the sheet of blue construction paper forward.  I had been using it as a backdrop and mask for the previous "tarmac" shots.

BASF from the side

Below is a shot of the Sea Fury from behind.

BASF Beauty from the back

Next, from the front.

Sea Fury Front

And this time below is a shot of the Sea Fury from below.

BASF Beauty from below

Those two whitish things immediately trailing the "U.S.Navy" markings are actually two small clear plastic bits.  I believe them to be formation lights and I think that it's interesting that the very simplified PM kit would sport them whilst the much more advanced and detail Special Hobby Sea Fury kit does not.  One difference that does favor the SH kit is the landing gear bay.  On the PM kit it is far too shallow, being barely deep enough to allow the gear doors to be glued on, and thus leaving no scale room for the gear itself.  At least the SH kit gets that right.

Now, compare the inspiration...

Blue Angels Sea Fury by Jennings Heilig

To the resulting model...


BASF Profile

As I mentioned earlier, the Blue Angels have gone through several iterations of their livery.  What Jennings worked up was based off a contemporary Blue Angels bird, the decal set which I had at hand was for the very first years the Blue Angels were flying and they marked their planes different then.  The Blue Angels crest wasn't yet developed and the "Blue Angels" in script was both much smaller and only on the engine cowl, not the side of the fuselage.  Still though, I think the inspiration is well served.

A final beauty shot

And that's that.  A What If? profile inspired Blue Angels Sea Fury.



If you would like to know more about me, then ask me directly.  Just click on my email address here:
email me

In the meantime, I hope you have enjoyed your "stay" at this site.  Check back again to see what new images I have added.  Until then, stay well, play hard, play safe, and have fun!

Madoc

This page was last updated on: 06 June 2007  


Unless otherwise noted, all photographs and images on this page are copyright protected property of Madoc Pope.  If you would like to use any of my images you must contact me first before you do so.

[Top]

[Main]


In the meantime, I hope you have enjoyed your "stay" at this site.  Check back again to see what new images I have added.  Until then, stay well, play hard, play safe, and have fun!

Madoc